Positioner With Remote Control Electronics; Introduction To Remote Control Electronics; 19" Slide-In Module; Description 19" Slide-In Module 4 To 20 Ma - Siemens SIPART PS2 Operating Instructions Manual

Electropneumatic positioner
Hide thumbs Also See for SIPART PS2:
Table of Contents

Advertisement

Positioner with remote control electronics

F.1

Introduction to remote control electronics

In some cases it is advisable to use the positioner separately from the control electronics. The
option of separating the control electronics of the positioner is available for this purpose. This
means that the positioner is in a different location than the control electronics. This remote
control electronics of the positioner allows the valves to be controlled in radiation contaminated
environment, as all highly integrated electronic components are located in the area that is
protected from radiation. Highly integrated electronic components are, for example, memory
blocks and microprocessor blocks.
For the above described deployment you required the two following components:
● Component 1 consisting of the control electronics in the form of a 19" slide-in module. The
19" slide-in module is installed in the control cabinet and is available in the following two
versions:
– Slide-in module as 4 to 20 mA with 2-wire connection, article number A5E00151560
● Component 2 consisting of the positioner without control electronics. The positioner with
control electronics is mounted on the valve.
– Positioner without control electronics with position detection system and pneumatic unit,
Components 1 and 2 are connected electrically to each other. The components are described
below.
F.2

19" slide-in module

F.2.1

Description 19" slide-in module 4 to 20 mA

Description
This component is a control electronics in the 19" slide-in module in 4 to 20 mA version.
Commissioning is only possible in conjunction with a positioner component 6DR5910. The 19"
slide-in module has three channels and control up to three valves.
The control electronics supplies the current position of the valve in the form of a current of 4
to 20 mA, which corresponds to the position feedback.
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
mounted on the valve, article number 6DR5910-0NG00-0AA0.
Positioner without basic electronics 6DR5910 (Page 300)
F
293

Advertisement

Table of Contents
loading

Table of Contents