Connecting The External Position Detection System To The Emc Filter Module - Siemens SIPART PS2 Operating Instructions Manual

There are two options for the EMC filter module:
● The EMC filter module is already fitted in the positioner, see Catalog FI 01
● The EMC filter module is retrofitted in the positioner, article number C73451-A430-D23.
For information on retrofitting the EMC filter module, refer to EMC filter module (Page 69)
Figure B-9
Procedure for mounting the external position detection system
● Attach the external position detection system to the valve. Mounting corresponds to the
mounting of the SIPART PS2 positioner.
See also
Installing optional modules in the standard and intrinsically safe version (Page 51)
B.3.3

Connecting the external position detection system to the EMC filter module

Requirement
You need the EMC filter module with article number C73451‑A430‑D23 for the electrical
connection of an external position detection system, article number C73451-A430-D78 or
6DR4004-1ES to the positioner.
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
External position detection with NCS or external position detection system
①
Pneumatic line
②
Pneumatic line for double-action actuators
③
External position detection system C73451-A430-D78
④
Electrical cable
⑤
Retrofittable EMC filter module (fitted in the positioner or retrofittable)
⑥
Positioner
Separate installation of external position detection system and positioner
B.3 External position detection system
277