Scope Of Delivery Of Ncs For Linear Actuators > 14 Mm (0.55 Inch) - Siemens SIPART PS2 Operating Instructions Manual

Linear actuator with a stroke range up to 14 mm (0.55 inch) 6DR4004-.N.20
Quantity
Equipment you need in addition to the scope of delivery listed below:
● A SIPART PS2 positioner with built-in EMC filter module, order number 6DR5...-....2.
Or:
● An EMC filter module with article number C73451-A430-D23 for retrofitting SIPART PS2
positioners.
In order to prevent interference on the sensor, the mounting elements should be made of non-
ferrous antimagnetic metal, e.g. A4 stainless steel or aluminum.
B.2.7.3 Scope of delivery of NCS for linear actuators > 14 mm (0.55 inch) .
Linear actuator > 14 mm (0.55 inch) 6DR4004-.N.30
Quantity
With this assembly kit, the linear stroke is converted into a rotary movement by means of lever
action.
In order to prevent interference on the sensor, the mounting elements should be made of non-
ferrous antimagnetic metal, e.g. A4 stainless steel or aluminum.
Equipment you need in addition to the scope of delivery listed below:
● NAMUR linear actuator mounting kit with short lever arm (2 to 35 mm), article number
6DR4004‑8V.
● With additional extended lever arm for the range from 35 mm to 130 mm; article number
6DR4004-8L.
● A SIPART PS2 positioner with built-in EMC filter module, article number 6DR5...-....2.
Or:
● An EMC filter module with Order No. C73451-A430-D23 for retrofitting SIPART PS2
positioners.
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
External position detection with NCS or external position detection system
Designation
2 Hex socket head screw
1 Non-contacting sensor
1 Screw
1 Sealing
1 Plugs
1 Cable clamp
1 DVD
Designation
1 NCS assembly kit, completely
assembled
1 DVD
Notes
M6x25
Cable lengths as ordered
F3x8
For cable bushings
For closing the sealing insert
with documentation
Notes
Mounting by means of assembly kit for NAMUR linear
actuators
Mounting kit available on separate order; refer to the 'Ac‐
cessories' section in Catalog FI 01
with documentation
B.2 Non-Contacting Sensor
275