Certificates, Approvals, Explosion Protection - Siemens SIPART PS2 Operating Instructions Manual

12.5

Certificates, approvals, explosion protection

Certificates and approvals
Classification according to pressure equip‐
ment directive (PED 2014/68/EU)
CE conformity
UL conformity
See also
Certificates (http://www.siemens.com/processinstrumentation/certificates)
Explosion protection
Explosion protection
Explosion protection in accordance with
Intrinsic safety "i", "IS"
● 6DR5..0/1/2/3-0E; 6DR5..1/2/3-0F/K
● 6DR5..1/2/3-0F
● 6DR5..0-0E/F/K
Dust, protection by means of enclosure "t", "DIP"
● 6DR5..1/2/3-0D/K; 6DR5..6-0E
For use in Zone 2 / DIV.2: "ec", "nA", "ic"
● 6DR5..1/2/3-0F/G/K
● 6DR5..0-0F
Flameproof enclosure encapsulation "d",
"XP"
● 6DR5..5/6
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC
12.5 Certificates, approvals, explosion protection
For fluid group 1 gases; fulfills requirements according to article 4, paragraph 3
(good engineering practice SEP)
The applicable directives and applied standards with their revision levels can be
found in the EU declaration of conformity on the Internet.
You can find the appropriate "Standard(s) for Safety", including the relevant
versions, in the UL-CERTIFICATE OF COMPLIANCE on the Internet.
Ex markings
ATEX/IECEx
II 2 G Ex ia IIC T6/T4 Gb
II 3 G Ex ic IIC T6/T4 Gc
-
II 2 D Ex ia IIIC T110°C Db
II 2 D Ex tb IIIC T100°C Db
II 3 G Ex ec IIC T6/T4 Gc
-
II 2 G Ex d IIC T6/T4 Gb
Technical data
FM/CSA
Cl I Zn 1 AEx ib IIC
IS Cl I Div 1 Gp A-D
Cl I Zn 1 AEx ib IIC
IS Cl I Div 1 Gp A-D
Cl I Zn 1 AEx ib IIC
IS Cl I, II, III Div 1 Gp A-G
Zn 21 AEx ib Db IIIC T110°C
DIP Cl II, III Div 1 Gp E-G
Zn 21 AEx tb IIIC T100°C
Cl I Zn 2 AEx nA IIC
NI Cl I Div 2 Gp A-D
Cl I Zn 2 AEx nA IIC
NI Cl I Div 2 Gp A-D
FM
Cl I Zn 1 AEx d IIC
XP Cl I Div 1 Gp A-D
CSA
Cl I Zn 1 AEx d IIC
XP Cl I Div 1 Gp C-D
235