Diagnostic Value '18.Zero - Lower Endstop; Diagnostic Value '19.Open - Upper Endstop; Diagnostic Value '20.Pavg - Average Value Of Position - Siemens SIPART PS2 Operating Instructions Manual

Alarm, error, and system messages
10.2 Diagnostics
10.2.4.16

Diagnostic value '18.ZERO - Lower endstop'

Requirement:
Display range:
Purpose:
10.2.4.17

Diagnostic value '19.OPEN - Upper endstop'

Requirement:
Display range:
Purpose:
10.2.4.18

Diagnostic value '20.PAVG - Average value of position'

Indication on the display: ● OFF
Purpose:
206
Monitoring of lower endstop 'F.\\ZERO' (Page 180) parameter is ac‐
tivated.
'39.YCLS' Tight closing/fast closing with manipulated variable
(Page 157) Parameter is set to one of the following values: 'do', 'uP
do', 'Fd', 'Fu Fd', 'uP Fd', 'Fu do'
● OFF
● 0.0 ... 100.0
Indication of how many percent the lower endstop has changed
compared to its value during initialization. If the underlying function
is deactivated, 'OFF' is displayed.
Monitoring the upper endstop 'G.\\OPEN' (Page 181) parameter is
activated.
'39.YCLS' Tight closing/fast closing with manipulated variable
(Page 157) parameter is set to one of the following values: 'uP',
'uP do', 'Fu', 'Fu Fd', 'uP Fd', 'Fu do'
● OFF
● 0.0 ... 100.0
An indication of the current shift of the upper endstop compared to
its initialization value. If the underlying function is deactivated, 'OFF'
is displayed.
● IdLE
● rEF
● COMP
This value shows the last calculated comparison average. Meaning
of the displays:
● OFF: The underlying function is deactivated in the configuration
menu.
● IdLE : Inactive. The function has not been started yet.
● rEF: The reference average is calculated. The function was
started, and the reference interval is in progress at the moment.
● COMP: The comparison average is calculated. The function was
started, and the comparison interval is in progress at the moment.
SIPART PS2 with and without HART
Operating Instructions, 05/2017, A5E00074631-AC