Alarm, error, and system messages
10.1 Output of system messages in the display
Message
Line
Up
Down
nn.n
X
FINISH
X
See also
System messages before initialization (Page 193)
10.1.3
System messages when exiting the Configuration mode
Remarks about the tables:
nn
/
Messages when exiting the configuration mode:
Message
Line
Up
Bot‐
tom
n.nn.nn-
X
nn
X
Error
X
SLnn
X
10.1.4
System messages during operation
Remarks about the tables:
nn
/
196
Meaning/cause
Initialization completed successfully with the
display of actuator travel or the actuator angle
Stands for variable numeric values
Error symbol
(slash): the texts on the left and right of the slash flash alternately
Operating mode
Automatic
Manual mode
Stands for variable numeric values
Error symbol
(slash): the texts on the left and right of the slash flash alternately
Measure
1. Briefly acknowledge using
2. Leave configuration level with a long
press on the
Meaning / cause
P manual mode
Software version
Monotony interruption
of the free character‐
istic on the setpoint
turning point n
Operating Instructions, 05/2017, A5E00074631-AC
button.
button.
Measure
● Maintenance
● Correct the value
SIPART PS2 with and without HART