Page 2
Copyright & Trademarks Specifications are subject to change without notice. a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or...
TP-LINK Smart Wi-Fi Light Switch is a standard, single-pole, wall light switch that can be controlled via your iOS or Android devices. Along with the TP-LINK Kasa mobile app, you can follow an intuitive wiring instructions provided to replace your standard in-...
Page 6
Press and hold (about 5 seconds) RESET until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks green rapidly to factory reset the Smart Switch. www.tp-link.com...
• The Smart Switch must be installed and used in accordance with the National Electric Code (NEC) or your local electrical code. If you are unfamiliar with these codes and requirements, or are uncomfortable performing the installation, consult www.tp-link.com...
Page 8
• Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces. 1 Download TP-LINK Kasa from App Store or Google Play. Scan QR code 2 Connect mobile device to your 2.4GHz Wi-Fi...
Page 9
Locate the reset button below the Smart Switch? switch on the left. home Press and hold for 5 seconds until the Wi-Fi light blinks amber and green. Log in to access your devices. RESE T NOT YE T NEXT Yes, I have www.tp-link.com...
After creating your Kasa account, you will need to verify the email associated with your account by clicking a link in an email that Kasa sends you. Until you verify the email, much of the above functionality will not work. www.tp-link.com...
Firmware Update to update your Smart Home devices when there is an update available. Refer to Firmware Update for instructions. Customizing Smart Switches You can personalize your Smart Switches with name, icon, and other information from the switch’s details screen. www.tp-link.com...
Page 12
3. On the Device Settings screen, tap the icon for each setting you want to personalize. • Device Name – Create a unique name for your Smart Switch. • Device Icon – Choose one of the available icons or use your own custom icon. www.tp-link.com...
Switch that you want to create a schedule for. 2. Tap (Schedule) to open the Schedule screen. 3. Tap to create an event. 4. Within the Create Event screen, set your preferred state for the light bulb (ON or OFF), time, and day(s). 5. Tap Save. www.tp-link.com...
You can create as many events as you like and edit them at any time from the Schedule screen. Creating Scenes Take full advantage of your TP-LINK Smart Home devices in your home with “Scenes”. A scene is a preset group of Smart Devices (such as Smart Plugs and...
Page 15
2. Choose one of the preset scenes to start, or choose Custom to set up your own scene that is personalized to suit your liking. To set a scene, you will need to select one or more devices to be controlled, and then define their actions and/or states. www.tp-link.com...
Away Mode allows you to automate your Smart Switches in combination with other Smart Home products to respond to your specific schedules. For example, turn on and off Smart Devices at certain intervals to simulate occupancy when you’re away from home. www.tp-link.com...
Page 17
Mode so you don’t have to manually activate it, tap Set Schedule. Note: Multiple schedules can be set to repeat weekly on the day(s) of your choice. 4. Within the Create Event screen, set your preferred mode (Away or Home), time, and day(s). www.tp-link.com...
(average daily, weekly, and monthly) on your Smart Switches. 9:41 PM 100% Energy Usage TODAY Current Power Total Consumption 2.80 3.10 PAST 7 DAYS Daily Average Total Consumption 5.00 35.0 PAST 30 DAYS Daily Average Total Consumption 4.00 www.tp-link.com...
Page 19
User’s manual Smart Wi-Fi Light Switch 1. On the Devices screen, tap on the row of the Smart Switch to go to its controls. 2. Tap the (Usage). www.tp-link.com...
Smart Bulb HS120 This process may take a few minutes. Latest Version: 1.2.0 0 Available Updates 1. Launch Kasa. 2. Tap the (navigation drawer) and then Settings. 3. Tap Firmware Update. 4. Within the Firmware Update screen, tap Update. www.tp-link.com...
Resetting Resetting the Smart Switch can help you troubleshoot Please keep in mind that factory resetting a device will erase all of your custom settings and restore them to factory default settings. RESET www.tp-link.com...
Page 22
• Press and hold (about 10 seconds) until the Wi-Fi status LED blinks green rapidly to reset the Smart Switch to factory defaults. Note that factory setting the Smart Switch will erase all of your custom settings, and you’ll have to set it up again. www.tp-link.com...
Smart Switch to your Wi-Fi network. • Do not use a metal faceplate with the Smart Switch to prevent Wi-Fi signal interference. • Power cycle your router and/or reboot the Smart Switch by pressing the RESTART button www.tp-link.com...
(one location) wiring only and requires a neutral wire for operation. Usage Tips • Place the Smart Switch within the range of your Wi- Fi router or access point (approximately 150 feet). • Avoid physical obstructions and radio interference in the surrounding area. www.tp-link.com...
User’s manual Smart Wi-Fi Light Switch Support Should you encounter any issues with the Smart Wi-Fi Light Switch, please visit our support page at www.tp-link.com/support for web support and troubleshooting information. www.tp-link.com...
(1) year from the date of retail purchase. TP-LINK’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at TP-LINK’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment.
Page 27
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction www.tp-link.com...
L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. Radiation Exposure Statement www.tp-link.com...
• Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. • Avoid water and wet locations. www.tp-link.com...
Page 31
2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. www.tp-link.com...