Status Screens - Operational Mode; Initial Status; Main Inverter Status - SolarEdge SE5000H-US Installation Manual

Hardware IDs: Displays the following HW serial numbers (if exist, and connected to the inverter):
l
ID: t he inverter's ID
o
RGM1: A preassembled RGM or any external electricity meter (with lower Modbus ID)
o
RGM2: A second external electricity meter (with the higher Modbus ID)
o
ZB: Z igbee MAC address
o
Cell: MEID (CDMA) or IMEI (GSM)
o

Status Screens - Operational Mode

During normal operation pressing the LCD buttons turns on the LCD backlight.
Additional presses display the following screens one after the other.

Initial Status

V a c [ V ]
2 4 0 . 7
P _ O K : X X X / Y Y Y
- - - - - - - - - - - - - - - -
Vac [V]: The AC output voltage
l
Vdc [V]: The DC input voltage
l
Pac [W]: The AC output power
l

Main Inverter Status

V a c [ V ]
2 4 0 . 7 W
F a c [ H z ]
5 0 . 0 W W W
Vac [V]: The AC output voltage.
l
Vdc [V]: The DC input voltage.
l
Pac [W]: The AC output power.
l
Fac [Hz]: The AC output frequency.
l
OPs_Ok: Number of optimizers sending telemetries (indicating that they are paired)
l
Temp [C or F]: The inverter heat sink temperature
l
SolarEdge-HD-Wave Inverter Installation Guide MAN-01-00306-1.0
V d c [ V ] P a c [ W ]
3 7 1 . 9 2 3 4 9 . 3
< S _ O K >
O N
V d c [ V ] P a c [ W ]
3 7 1 . 9 3 2 1 0 . 0
O P s _ O k T e m p
1 1 W W W 2 8 . 2
Chapter 6: User Interface
41