Configuration Menu Options; Country And Grid; Language; Communication - SolarEdge SE5000H-US Installation Manual

Configuration Menu Options

This section describes how to use the LCD menus for configuring the inverter.

Country and Grid

1. Select the Country option to specify the country in which the inverter is installed and the grid to
which it is connected. This parameter may arrive pre-configured. If so, verify that it is set to the
proper country.
WARNING!
The inverter must be configured to the proper country in order to ensure that it complies with the
country grid code and functions properly with that country grids.
L'onduleur doit être configuré pour le pays approprié afin d'assurer un fonctionnement
convenable avec le réseau de ce pays.
A list of countries is displayed. If no country is configured, the value is <NONE>.
NOTE
If an inverter is not configured to any country, it will not produce energy, and the following
message will be displayed on the LCD:
No Country Selected
A plus sign (+) near the country indicates that another menu will be displayed after selection.
When selecting Auto , the inverter automatically detects the used grid.
l
When selecting an option with No Neutral or No N, connection to Neutral line is not required.
l
For any other option, you must connect the Neutral line.
2. Confirm your country selection in the confirmation screen: Toggle to YES and press Enter.

Language

1. Select the Language option to set the language in which the LCD should display.
2. Confirm your language selection in the confirmation screen: Toggle to YES and press Enter.

Communication

1. Select the Communication option to define and configure:
The communication option used by t he inverter to communicate with the SolarEdge
l
monitoring portal
The communication option used to communicate between multiple S olarEdge devices or
l
other external non-SolarEdge devices, such as electricity meters or loggers.
2. Select Server to set which communication method is used to communicate between d evices and the
SolarEdge monitoring portal. Refer to f or a full description of these communication options.
NOTE
The Server menu shows only the communication options installed in the inverter.
The following shows a hierarchical tree of the menu options in the Communication menu.
For detailed information about all the configuration options, refer to the Communication
Options Application Note, available on the SolarEdge website at
http://www.solaredge.us/files/pdfs/solaredge-communication_options_application_
note_v2_250_and_above.pdf.
SolarEdge-HD-Wave Inverter Installation Guide MAN-01-00306-1.0
Chapter 6: User Interface
37