Chapter 6: User Interface
LCD User Buttons
Use the f our buttons located under the LCD panel for controlling the LCD menus and configuring the
inverter. When pressing the buttons, make sure your finger is directly aligned with the button to avoid
erratic presses. A beeping sound is produced as input confirmation.
Use the four user buttons to control the LCD panel menus:
Esc: Moves the cursor (>) to the beginning of the currently displayed parameter; goes to the previous
l
menu, and cancels a value change with a long press (until Aborted is displayed).
Up and Down: Moves the cursor from one menu option to another, moves among the characters of
l
a displayed parameter, and toggles between possible characters when setting a value.
OK (Enter) : Selects a menu option and accepts a value change with a long press (until Applied is
l
displayed).
Use the three rightmost buttons Up, Down and OK sequentially for entering the Setup mode.
The LCD screen displays status information of the system and various menus for configuration options.
The LCD panel and buttons are used during the following processes:
Operational mode: The LCD panel allows checking for proper system o peration. Refer to Status
l
Screens - Operational Mode on page 41 for a description of this option. Use the up and down buttons
to toggle through the informative displays.
Setup mode: Upon installation, an installer may perform basic configuration, as described in Inverter
l
Configuration – Setup Mode on the next page.
Error messages: In the event of a problem, an error message may be displayed on the LCD panel. For
l
more information, refer to Errors and Troubleshooting on page 56 and Inverter Configuration – Setup
Mode on the next page
SolarEdge-HD-Wave Inverter Installation Guide MAN-01-00306-1.0
Figure 19: LCD buttons
Chapter 6: User Interface
33