1. End User License Agreement ...3 2. Important notes ...4 3. Customer support...4 4. Installing the utility software ...4 I. Prior to installation...4 II. Installation procedure ...4 5. Installing the TWAIN driver ...5 8. Uninstalling the RDC-1 through RDC-300Z series utility software ...5 CONTENTS...
“in use” when it is either loaded into RAM or installed into the hard disk or other permanent memory. A special license permit from Ricoh is required if the program is going to be installed on a network server for the sole purpose of distribution to other computers.
Users who cannot log on as administrators will not be able to install this software. I. Prior to installation (1) Download the latest RDC-1 through RDC-300Z series software at the URL above. Be sure to note the location where you save the downloaded files. You will need that information during the installation. Also, be sure to save the downloaded files to your computer’s hard drive.
After connecting the RDC-1 through RDC-300Z series to your computer (1) Turn the camera mode dial to Playback and open the LCD display to start the camera. (2) Click on the Start button and select “DU-4 for Windows95” from the All Programs menu.