TP-Link Archer C59 Quick Installation Manual

Quick Installation Guide
AC1350 Wireless Dual Band Router
Connect the Hardware
If your Internet connection is through an Ethernet cable from the wall
instead of through a modem, connect the Ethernet cable directly to
the router's Internet port, then follow step 4 and 5 to complete the
hardware connection.
Internet
Power adapter
Modem
Router
1
Turn off the modem,
and remove the backup
battery if it has one.
2
Connect the modem to the
Internet port on your router
with an Ethernet cable.
3
Turn on the modem, and
then wait about 2 minutes
for it to restart.
Power adapter
4
Turn on the router.
W PS
5
Verify that the hardware
connection is correct by
checking these LEDs.
Power 2.4G 5G Internet
On On On
Note: If the 2.4G LED and 5G LED
are off, please press the Wi-Fi button
on the rear panel for 2 seconds, then
check the LEDs again in a few seconds.
On