Scan Settings When Using Twain Scanner; Setting Original Orientation On The Twain Scanner - Ricoh MP 2590 Scanner Reference

Various Scan Settings

Scan Settings When Using Twain Scanner

This section explains how to specify original orientation and scan setting for a
bundle of mixed size originals when using the TWAIN scanner.

Setting Original Orientation on the TWAIN Scanner

To correctly display the top/bottom orientation of the scanned original on a cli-
ent computer, the placement of the original and the settings made in the Scanner
Control dialog box must match.
A
Open the Scanner Control dialog box.
For details about how to open the Scanner Control dialog box, see "Basic Net-
work TWAIN Scanner Operation".
B
In the [Original Scan Method:] list, select the place where the original is placed.
C
In the [Orig.Orientn.:] list, select [
D
In the [Orientation:] list, select [
6
[
E
If an original is placed in the ADF, from the drop down menu of [Scan Set-
tings], select [1 Sided], [2 Sided(Top to Top)], or [2 Sided(Top to Bottom)].
Reference
p.97 "Basic Network TWAIN Scanner Operation"
Placing Originals
The following table shows the relationship between the original orientation and
the Scanner Properties dialog box settings:
❖ Exposure Glass
Original Orientation
top edge touches top left of exposure glass
This orientation is the TWAIN driver's stand-
ard setting. Place originals in this orientation
normally.
top edge touches rear of exposure glass
130
], or [
/
] or [ ].
/ ], [
/ ].
TWAIN Scanner Control Dialog Box Key
/ ],