Changing A Registered Program - Ricoh MP 2590 Scanner Reference

Changing a Registered Program

To change the settings registered to a program:
A
Press the {Program} key.
B
Press [B Recall].
C
Press the number of the program you want to change.
D
Change settings of the program.
E
Press the {Program} key.
F
Press [m Register].
G
Press the number of the program whose settings you changed or the
number of a different program in which you want to register the changed
settings.
H
If you select a program that is already registered, a confirmation message
appears. To overwrite the program, press [Register].
If you select a new program number, you can omit this step. Proceed to the
next step.
I
Enter a program name.
J
Press [OK].
If overwritten, the registered program is deleted.
The new program name appears briefly, and then the initial screen reappears
after a moment.
AHY001S
Programs
6
127