TP-Link RE650 Quick Installation Manual

Quick Installation Guide
Applicable Model:
Quick Setup Using a Web Browser
Option ONE
Power on
Plug the extender into an electrical
outlet near your router, and wait until
the POWER LED is lit and solid blue.
Configure
1
Launch a web browser and enter
http://tplinkrepeater.net or http://192.168.0.254
in the address bar. Create a password for future
login attempts, and click Start.
http://tplinkrepeater.net
Create Password
Confirm Password
Start
If the login window does not appear, please refer to the
FAQ > Q1.
Relocate
1
Plug the extender into an electrical outlet about halfway
between your router and the Wi-Fi dead zone. The
location you choose must be within the range of your
host network.
2
Wait until the LED is lit and solid blue. If not, relocate it
closer to the router to achieve better signal quality.
Enjoy! Both extended networks share the
names (SSIDs)
RE650
Connect to the extender
For Windows Users
Connection are available
Wireless Network Connection
TP-LINK_Extender_2.4GHz
TP-LINK_Extender_5GHz
Connect automatically
√
1. Unplug the Ethernet cable from your
computer (if any).
2. Click the Wi-Fi icon on your taskbar and
connect to the extender's network (e.g.
TP-LINK_Extender_2.4GHz/5GHz).
2
Select your router's 2.4GHz/5GHz host
network and enter its password. Then click
Next.
2.4GHz Host Network
Please select 2.4GHz Host network or skip this network.
ID
1
2
If your router does not support 5GHz wireless
network, please click Skip to continue.
same Wi-Fi passwords
if you have customized them during the configuration.
LED Explanation
(RE)
Solid blue: The extender is connected to the
router, and is in a good location.
Solid red: The extender is connected to the
router, but is too far away from the router.
Blinking: WPS connection is in process.
Off: No active connection.
Button Explanation
LED button: To turn on or off all the LEDs, press the LED button.
Power button: To turn on or off the extender, press the Power button.
or
Connect
5GHz Host Network Summary
Wireless Settings
MAC Address
SSID Signal Security
Your router's wireless name
30:B5:C1:33:99:76
Next
Host 2.4GHz Password: 12345678
TP_LINK_123456 23:B5:C0:30:90:06
Skip
Exit Other... Rescan
Host Network
Host Network
Blue
Ideal location
as those of your host networks, but may have
2.4GHz/5GHz
On: The extender is connected to the
2.4GHz/5GHz wireless network of your
host router.
Off: No connection.
POWER
On: The extender is on.
Blinking: The extender is initializing.
Off: The extender is off.
For Mac OS X Users
Wi-Fi: On
Turn Wi-Fi Off
TP-LINK_Extender_2.4GHz
TP-LINK_Extender_5GHz
Join Other Network...
Create Network...
Open Network Preferences...
1. Unplug the Ethernet cable from your Mac (if
any).
2. Click the Wi-Fi icon in the top right corner of
the screen, and connect to the extender's
network (e.g.
TP-LINK_Extender_2.4GHz/5GHz).
3
Either keep the default SSIDs or customize
them for the extended networks, and then
click Next.
5GHz Host Network
2.4GHz Host Network Wireless Settings
Your network name
Extended 2.4GHz SSID: Copy Host SSID
Hide SSID broadcast
The extended 2.4GHz password is the same as your Host password.
Your network name_5G
Extended 5GHz SSID: Copy Host SSID
Hide SSID broadcast
The extended 5GHz password is the same as your Host password.
4
Verify your wireless settings and click Save.
The corresponding LED(s) (
should turn on and stay solid.
Extended Network
Red
Too far away
different wireless network
Summary
Back Next
/ )