Download Print this page

TP-Link TL-MC1400 Installation Manual

14-slot rackmount chassis

Hide thumbs Also See for TL-MC1400:

Download this manual See also: User Manual

Installation Guide

14-Slot Rackmount Chassis

TL-MC1400

Package Contents: TL-MC1400, AC Power Cord, Fourteen Retainer-plates, Installation Guide

Installation

Step 1: Install the Media Converters in the Chassis

Note: It is recommended to use TP-Link media converters. Other vendors' products may be incompatible.

1. Tweak out the two screws on the media converter. Then install the

retainer-plate (provided with the chassis) to the media converter using

the screws removed from the media converter.

Step 2: Mount the Chassis in the Rack

Fasten the chassis to the rack with screws through the holes of the brackets on each side.

Step 3: Power On

1. Electrically connect the Grounding Terminal on the rear panel of the

chassis to ground via the ground cable.

2. Remove the front metal plate of the slot on the chassis, then carefully

slide the media converter into the slot and lock it tightly with the

locking knob.

Note:

1. The chassis supports EIA standard-sized, 19-inch racks.

2. For security reasons, it is recommended to install the chassis as shown left.

2. Connect the chassis to the AC outlet using the provided power cord.

For technical support and other information, please visit

http://www.tp-link.com/support, or simply scan the QR code

7106507801 REV3.0.0

Page 1 Installation Step 1: Install the Media Converters in the Chassis Note: It is recommended to use TP-Link media converters. Other vendors’ products may be incompatible. 1. Tweak out the two screws on the media converter. Then install the 2. Remove the front metal plate of the slot on the chassis, then carefully...
Page 2 CrVI PBDE EU declaration of conformity ○ ○ ○ ○ ○ ○ TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of 外殼外殼 ○ ○ ○ ○ ○ ○ directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.