Service And Warranty; Service; Guidelines; Supplies - Industrial Scientific Ventis Pro Series Product Manual

Service and Warranty

Service

Warranty
Service

Guidelines

Service tasks that can be completed by Industrial Scientific customers are described in this Product
Manual. Table 8.1 indicates which parts and components are customer replaceable. All other service tasks
should be performed only by Industrial Scientific or an authorized service center.
 Service tasks should be performed only by qualified personnel.
 Use only approved Industrial Scientific parts and accessories.
 Perform service tasks in a nonhazardous location.
 Work on a nonconductive surface in a well-lit area.
 Wear grounding straps to prevent electrostatic discharge (ESD), which can cause damage to the
instrument's electronics.
 Before removing the instrument's battery, dock the instrument to synchronize it with iNet Control,
Accessory Software, or DSSAC.
Use care when working with the adhesive-backed filters and gaskets.
 Be careful not to pierce or tear these items.
 When using tweezers, apply gentle pressure.
 Once the adhesive touches a surface, any attempt to remove or reposition the item may cause it
damage.
Use care when working with sensors and water barriers.
 Do not touch the sensors' white membranes as this can contaminate the sensors.
 Do not separate the sensor from its membrane.
 Do not damage or tear the membranes or water barriers.

Supplies

 T10 torx screwdriver
 Needle-nose tweezers (for barrier and filter replacement)
8