Start-up menu
Control how the instrument will interact with its operator during start-up: permit or prohibit all-user access to
each of item listed below.
Maintenance utilities:
Zero the installed sensors.
Bump test the installed sensors.
Maintenance status message:
No message
The number of days until the next dock is due
The number of days until the next calibration is due
The number of days since calibration was last performed
Startup menu
Next menu
Go to first
start-up
setting
End of menu
Revisit start-
Go to menus
up settings
Figure 4.2.B Navigating and editing start-up settings
Zero on start-up
Next setting
Set access
—
Bump test on start-up
Next setting
Set access
—
41
Maintenance status on start-
up
Next setting
Set access
and format
—