Comtrend Corporation ES-7201PoE User Manual

User Manual

ES-7201PoE| 5-Port PoE+ Gigabit Ethernet Switch
A
Understanding the PoE+ Switch
B
Plug and Play Setup
1. Connect your network devices to any available port (Ports 1-4 are PoE+ ports).
2. Use port 5 for up-linking to the network.
Power on the Switch, the "Power" LED will appear GREEN. The PoE+ Switch will go through
3.
Power-On-Self-Test (POST). The "System" LED will appear
of the POST, the "System" LED will turn and stay GREEN.
4. The switch will automatically start to feed power to the connected 802.3af/at-compliant device.
5. The LED ON/OFF push button on the front panel will toggle ON and OFF all function LEDs, except
the"Power"LED.
RED
during the POST. Upon successful completion
Page 1