EURORACK UB502/UB802/UB1002/UB1202 SAFETY INSTRUCTIONS All the safety and operation instructions should be read before the device is operated. The safety and operating instructions should be retained for future reference. All warnings on the device and in the operating instructions should be adhered to.
The interface of BEHRINGER mixing consoles is optimized for these tasks enabling you to easily keep track of the signal path. 1.2 The users manual Kindest regards, The users manual is designed to give you both an overview of...
XLR connector and also features a switchable +48V phantom power supply for condenser microphones. Please note: the EURORACK UB502 does not supply phantom power. 1.3.2 Initial operation Be sure that there is enough space around the unit for cooling...
EURORACK UB502/UB802/UB1002/UB1202 2.1.3 FX sends, panorama and level adjustment Fig. 2.5: The equalizer of the stereo input channels A stereo EQ is highly preferable to two mono equalizers. when working on a stereo signal, as two separate EQs will usually produce an unwanted discrepancy between the left and right channels.
(e.g. CD player, tape deck, etc.) into the console. They can also be used as a standard stereo line input, so the output of a Fig. 2.13: Phantom power and control LEDs second EURORACK or BEHRINGER ULTRALINK PRO MX882 can be connected. 2. CONTROL ELEMENTS AND CONNECTORS...
EURORACK UB502/UB802/UB1002/UB1202 The red +48 V LED lights up when phantom power is on. The PHANTOM switch activates the phantom power supply on the XLR connectors of all mono channels. The blue POWER LED indicates that the console is powered on.
Type 1/4" TRS connector, electronically balanced BEHRINGER is constantly striving to manintain the highest professional standards. As a Impedance approx. 20 kΩ bal. / 10 kΩ unbal. result of these efforts, modifications may be made from time to time to existing products without Max.
(user included) will void the warranty. within the specified warranty period that are not excluded from this warranty as described under § 3 and 4, BEHRINGER shall, at 6. If an inspection of the product by BEHRINGER shows that...