Related Manuals for Strongway 46530
Summary of Contents for Strongway 46530
- Page 1 MULTI-USE DUMP CART OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 46530...
-
Page 2: General Safety Rules
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. - Page 3 IMPORTANT SAFETY CONSIDERATIONS • Do not exceed loading capacity. Maximum load capacity: 1,200 lbs. Maximum dumping load capacity: 500 lbs. • Distribute load over the surface of the tray. Do not load items on the top edges of the tray. •...
- Page 4 EXPLODED DRAWING FOR ASSEMBLY PARTS LIST Part# Description Qty. Bed Frame Poly Liner / Cover Front Panel Left Panel Right Panel Back Panel Front Axle Assembly Rear Axle Assembly Front Struts Rear Struts Wheels Handle Coupling Page of 12...
-
Page 5: Bed Frame
ASSEMBLY 1. Turn the cart bed frame assembly upside down. Use the cardboard from the carton to keep from scratching or damaging the finish. The front frame is pre-assembled to the cart bed frame. 2. Unlock the front frame by pulling the handle out and place the rear axle assembly under the frame to prop it up for easier access. -
Page 6: Front Struts
4. Next attach the front struts (2) to the underside of the front axle assembly using M8x20 hex head bolts (2), M8 flat washers (2), and M8 lock nuts (2). Tighten all hardware securely. 5. Attach the rear axle assembly to the bed frame using M8x20 carriage bolts (2), M8 flat washers (2), and M8 lock nuts (2). -
Page 7: Wheels
7. Attach the wheels to the cart by first placing the wheel spacers (4) onto the front and rear axles. 8. Place the wheels onto each axle (valve stems facing out) using the M12 flat washers (4) and M12 lock nuts (4). Tighten all nuts securely. Turn cart upright. - Page 8 10. Insert the plastic tray by lining up the openings on the rim of the tray with the tabs on the top edges of the side panels. Lock the tray in place by sliding cotter pins through the tabs. The plastic tray can also be used as a cover / work surface. Lock the tray by sliding the cotter pins through the tabs.
- Page 9 OPERATION Distribute the load evenly over the surface of the tray. Do not load items on the top edges of the tray. USING THE SWIVEL HANDLE 1. Remove clips and cotter pins. 2. Rotate the handle and insert cotter pin. Secure by attaching the clip. 3.
- Page 10 MAINTENANCE • Maintain your cart. It is recommended that the general condition of any cart be examined before it is used. Keep your cart in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel. Page of 12...
-
Page 11: Front Panel
DIAGRAM & REPLACEMENT PARTS LIST Part# Description Qty. Front Panel Left Panel Right Panel Back Panel Front Axle Assembly Rear Axle Assembly Front Struts Rear Struts Wheels Handle Coupling Hardware Kit For replacement parts and technical questions, please call 1-800-222-5381. Page of 12... - Page 12 WARRANTY 1-Year Limited Warranty Distributed by Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306 NorthernTool.com Made in China Page of 12...