Solid-State Drive - HP 14-ck0 Series Maintenance And Service Manual

Solid-state drive

Description
512 GB, PCIe, NVMe
256 GB, PCIe, NVMe
256 GB, SATA-3, TLC
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the solid-state drive:
Remove the Phillips M2.0×3.0 screw (1), and then pull the solid-state drive module from the socket (2).
▲
Reverse this procedure to install the solid-state drive.
Bottom cover on page
Battery on page 31).
29).
Component replacement procedures
Spare part number
L23225-001
L23224-001
L23223-001
L23222-001
37