Sc Code Descriptions; Sc1Xx: Scanning - Ricoh D245 Service Manual

SC Code Descriptions

6.2 SC CODE DESCRIPTIONS

6.2.1 SC1XX: SCANNING

SC No. Level
101-01 B
SC No. Level
102-00 B
SM
Error Name/Error Condition/Major Cause/Solution
Lamp error (scanning)
The white level peak did not reach the prescribed threshold
when the white plate was scanned.

CIS defective

MPU defective

Harness defective

Condensation in the scanner unit

CIS dirty or positioned incorrectly

White plate dirty or positioned incorrectly
1. Perform the following operations.

Reconnect the harness of the CIS.

Reattach or clean the CIS.

Reattach or clean the white plate.
2. Replace the following parts.

Replace the CIS.

Replace the MPU.

Replace the harness of the CIS.
Error Name/Error Condition/Major Cause/Solution
LED light adjustment error
The white peak exceeded the prescribed threshold when the
white plate was scanned after a specified number of
adjustments.

CIS defective.

MPU defective

Harness defective
6-2 D245/D246/D247