4.15.2 SCANNING
Before doing the following scanner adjustments, perform or check the printing registration
/side-to-side adjustment and the blank margin adjustment.
Use an S5S test chart to perform the following adjustments.
Registration: Platen Mode
A: Leading edge registration (L-Edge Regist Adj)
B: Side-to-side registration (S-Edge Regist Adj)
1.
Place the test chart on the exposure glass and make a copy from one of the feed
stations.
2.
Check the leading edge and side-to-side registration, and adjust them using the
following SP modes if necessary.
SP No.
SP4-010-001
SP4-011-001
SM
SP Name
L-Edge Regist Adj
S-Edge Regist Adj
4-71
Adjustment after Replacement
Adjustment Range
±2.0 mm
±2.0 mm
D245/D246/D247