Adjustment After Replacement; Printing; Registration - Leading Edge/Side-To-Side - Ricoh D245 Service Manual

4.15 ADJUSTMENT AFTER REPLACEMENT

4.15.1 PRINTING


Make sure the paper is installed correctly in each paper tray before you start these
adjustments.

Print the registration page (page 5-46 "Test Pattern Printing") to use for these
adjustments.

Registration - Leading Edge/Side-to-Side

A: Leading edge registration (3 ± 2 mm)
B: Side-to-side registration (2 ± 1.5 mm)
1. Check the leading edge registration [A] for each paper feed station, and adjust them
using SP1-001.
Tray
Tray: Plain
Tray: Mid Thick
Tray: Thick
Bypass: Plain
Bypass: Mid Thick
Bypass: Thick
Duplex: Plain
Duplex: Mid Thick
SM
SP No.
SP1-001-002
SP1-001-003
SP1-001-004
SP1-001-007
SP1-001-008
SP1-001-009
SP1-001-013
SP1-001-014
4-69
Adjustment after Replacement
Threshold
4.2 ± 1.5 mm
4.2 ± 1.5 mm
4.2 ± 1.5 mm
D245/D246/D247