Cleaning Blade - Ricoh D245 Service Manual

PCDU Section

4.8.6 CLEANING BLADE

1. Charge roller (page 4-33)
2. Cleaning blade [A] (
3. When reassembling, adjust the image quality (page 4-37).

Reassembling

Apply toner to the edge of the new cleaning blade when you replace the cleaning
blade. This prevents possible damage to the OPC drum and blade.
1. After installing the cleaning blade, remove some of the toner from the old blade
with your finger.
2. Apply the toner to the edge [B] of the new cleaning blade. Make sure to apply the
toner evenly along full length of the new cleaning blade.
SM
x 2)
4-34 D245/D246/D247