What Is New In Publication Version 6.0? Sw 04.01; 6.0; Low Power Icons; New Layout Safety Messages - Accu-Chek Inform II Operator's Manual

What is new in publication version 6.0?
SW 04.01

Low power icons

New layout safety messages

Test principle

This section provides an overview of all major changes
from Operator's Manual version 5 to version 6. Deletions
or minor corrections are not listed.
Description of new features SW 04.01 and amendments
from the supplement (English master document
0 7466161001 (01) 2015-03 EN and all derived transla-
tions) have been implemented.
New icon (bottle with flashing blue drop) used to
■
prompt sample application for control, proficiency,
and linearity tests. For example, see page 78,
"Applying the control solution".
Configurable delay between activation of the scan-
■
ner and reading a barcode (PreAimer Delay). See
section "Barcode Configuration" on page 190.
More barcode types supported. See section
■
"Barcode Configuration" on page 190.
Additional information regarding lithium-ion
■
(Li-ion) batteries (Avoidance of electrical shock,
fire, and explosions; Possible hazards posed by the
battery pack). See section 1.2.
Information regarding shipping. See page 146.
■
If the battery pack is running low or not charging prop-
erly, the meter will display a series of low power icons.
See section "Low power icons" on page 165.
The presentation of safety messages in this manual has
been updated throughout. See section 1.2 "Important
safety instructions and additional information".
Description of the test principle used by the meter. See
page 18.
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator's Manual Version 6