Confirming Or Selecting The Test Strip Lot - Accu-Chek Inform II Operator's Manual

56
Confirming or selecting the test
strip lot
Patient Test
Patient 123456789
Use Strip Lot
123456?
03/17/17
Strip Lots
545794
344789
545777
344654
03/17/17
Once you have entered and confirmed the patient ID, you
are asked to choose the lot number for the test strips.
Compare the number displayed by the meter to the
number on the label of the test strip vial.
1
12:48 pm
■
■
■
The meter can be configured so that no QC lockout
occurs when you switch between stored test strip lots.
12:48 pm
However, the selected test strip lot must already have
passed a glucose control test.
A QC Lockout will still occur if a test strip lot is stored
in the meter but no glucose control test has been run.
A glucose control test must always be performed before
using a lot for the first time.
2
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator's Manual Version 6
Select the lot number as follows:
To read the lot number from the test strip vial via
barcode scanner, press and release
the instructions for scanning IDs (see note below).
If you want to use the preselected lot number dis-
played by the meter, touch
To use a different lot number than the one dis-
played, touch to display a list of stored lot
numbers. Select the desired lot number from the
list.
Touch to confirm the selected or scanned lot
number.
. Follow
to confirm.