Information
Diagnostics: Displays the Isolation Status and optimizers status screens. Refer to
l
http://www.solaredge.us/files/pdfs/application_note_isolation_fault_
troubleshooting.pdf.
AFCI: Enables or disables arc-fault self-test. Refer to
l
http://www.solaredge.com/sites/default/files/arc_fault_detection_application_
note_na.pdf .
Manual AFCI Test: Accessible from the LCD Light button menus only. Starts a self-test for arc
l
detection. Refer to http://www.solaredge.com/sites/default/files/arc_fault_detection_application_
note_na.pdf .
Standby Mode: Enables/disables Standby Mode - for remote commissioning.
l
Grid Protection: Available in specific countries. Enables viewing and setting grid protection values.
l
Board Replacement: Backs up the system parameters; Used during board replacement according to
l
the instructions supplied with replacement kits.
Information
Select Information to display the following options:
V e r s i o n s
E r r o r
L o g
W a r n i n g
H a r d w a r e
Versions: Displays inverter firmware versions:
l
ID: The inverter ID.
o
DSP 1/2: The DSP digital control board firmware version
o
CPU: The communication board firmware version
o
NOTE
Please have these numbers ready when you contact SolarEdge Support.
Error Log: Displays the last five errors.
l
Warning Log: Displays the last five warnings.
l
Hardware IDs: Displays the following HW serial numbers (if exist, and connected to the inverter):
l
ID: t he inverter's ID
o
RGM1 (Revenue Grade Meter): A preassembled RGM or any external electricity meter (with lower
o
Modbus ID)
RGM2: A second external electricity meter (with the higher Modbus ID)
o
ZB: Z igbee MAC address
o
Cell: MEID (CDMA) or IMEI (GSM)
o
BAT1: First battery ID
o
BAT2 : Second battery ID
o
64
l o g
I D s
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3