SolarEdge SE7600A-US Installation Manual page 44

Connecting to the Auto-transformer
Recommended
Connection Unit
cable type (min-
max AWG)
Temperature Sensor
External Devices 7-pin
Temperature sensor
terminal
24 AWG (16-24 AWG),
300 Vrms insulated
External Devices 7-pin
1 T1 and T2 are interchangable
42
Auto-transformer
connection
terminal block: T1
terminal block: T2
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
connection
Temperature sensor
1
terminal: T1
Temperature sensor
terminal: T2
Connection method
Connection Unit: Press the
protrusion at the top of the
terminal block to open the
connection hole, insert the wire
and release to spring back and
clamp the wire.
Auto-transformer:
Insert a flat blade screwdriver
o
into the square opening at the
top of the terminal block and
press to open clamp
mechanism.
Insert the wire into the round
o
opening and release the
screwdriver to spring back and
clamp the wire.