Connecting Communication To The Meter - SolarEdge SE7600A-US Installation Manual

Connecting Communication to the Meter

Connecting Communication to the Meter
If a meter was installed, connect it to the Connection Unit as described in the following table. For detailed
information refer to the installation guide supplied with the meter.
Recommended cable type
(min-max AWG)
RS485 24 AWG (16-24 AWG),
shielded twisted pair, 600V
insulated
Connect as illustrated below:
40
Connection Unit
Ext. Devices 7-pin terminal
block: B, A, G
Figure 25: Connection to a meter
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3
Meter connection
RS485 4-pin terminal block: B, A, G