Installation Equipment List; Inverter Transport And Storage - SolarEdge SE7600A-US Installation Manual

Installation Equipment List

For additional information, refer to
https://www.solaredge.com/sites/default/files/storedge_wiring_quick_guide_and_on_
site_checklist_na.pdf.
Installation Equipment List
Standard tools can be used during the installation of the SolarEdge system. The following is a
recommendation of the equipment needed for installation:
Allen screwdriver for 5mm screw type for the inverter cover, Connection Unit cover, and inverter side
l
screws
Standard flat-head screwdrivers set
l
Non-contact voltage detector
l
Cordless drill or screwdriver and bits suitable for the surface on which the inverter will be installed and
l
for opening the Connection Unit drill guides. Use of an impact driver is not recommended.
Appropriate mounting hardware ( for example: stainless bolts, nuts, and washers) for attaching:
l
the mounting bracket to the mounting surface
o
the power optimizer to the racking (not required for smart modules)
o
Wire cutters
l
Wire strippers
l
Voltmeter
l
For installing the communication options, you may also need the following:
For Ethernet:
l
CAT5/6 twisted pair Ethernet cable with RJ45 connector.
o
If using a CAT5/6 cable spool: RJ45 plug and RJ45 crimper
o
For RS485:
l
Four- or six-wire shielded twisted pair cable.
o
Watchmaker precision screwdriver set
o

Inverter Transport and Storage

Transport the inverter in its original packaging, facing up and without exposing it to unnecessary shocks.
If the original package is no longer available, use a similar box that can withstand the weight of the
inverter (refer to the inverter weight in the specification datasheet provided with the unit), has a handle
system and can be closed fully.
Store the inverter in a dry place where ambient temperatures are -13°F - 140°F / -25°C - +60°C .
12
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.3