Table of Contents
Advertisement
Connect
6.1
Connect electrically
6.1.1
Note regarding electromagnetic compatibility
Electromagnetic compatibility
The plastic enclosure is metallized from inside to increase the electromagnetic compatibility
(EMC) with respect to high-frequency radiation. The shield is connected to the threaded
bush shown in the following picture such that it is electrically conductive.
Note that this protection is effective only if you connect at least one of these bushes to the
earthed control valves through electrically conductive (bare) attachments.
Figure 6-1
SIPART PS2 with PROFIBUS communication
Operating Instructions, 09/2007, A5E00127926-07
Base plate
Shield
6
73
Advertisement
Table of Contents
