Installing The Module Cover - Siemens SIPART PS2 PA 6DR55 Series Operating Instructions Manual

Installing the optional modules
5.1 General information about the installation of option modules
5.1.4

Installing the module cover

Installing the module cover
Note
Untimely wear
The module cover is fastened using self-tapping screws. You can prevent the module cover
from wearing untimely by adhering to the installation instructions.
Proceed as follows to install the module cover:
1. Turn the screws anticlockwise until they noticeably engage in the thread pitch.
2. Carefully tighten both the screws clockwise.
See also
EMC filter module (Page 68)
60
SIPART PS2 with PROFIBUS communication
Operating Instructions, 09/2007, A5E00127926-07