Table of Contents
Advertisement
Operation
7.2 Operating modes
7.2.3
Overview of configuration
The following picture illustrates the handling of operating modes such as "Configuration" and
"Initialization mode":
Figure 7-4
7.2.4
Description of operating modes
P-manual mode
Note
The "P-manual mode" is preset for the positioner in the as-delivered condition.
The digital display of the positioner shows the current potentiometer position in the upper
line. "NOINI" blinks in the second line of the digital display.
You can move the actuator using the
Switch to "Configuration" and "Initialization mode" to adapt the actuator as per the positioner.
Alarms or position feedbacks can be triggered after initializing the positioner completely.
102
Overview of the "Configuration" operating mode
decrement and
increment buttons.
SIPART PS2 with PROFIBUS communication
Operating Instructions, 09/2007, A5E00127926-07
Advertisement
Table of Contents
