Connection Notes For Audio Devices - Samsung Smart Remote E-Manual

Many computer graphics adaptors do not have HDMI ports, but have DVI ports instead. If your PC does not
●
support HDMI video out, connect your PC with an HDMI-DVI cable.
"
For more information, refer to "Connecting a Computer."
For One Connect supported models, when the TV is connected to other equipment such as a DVD/BD player
●
or a set-top-box via HDMI, network standby mode will be automatically activated. In the network standby
mode, the TV continues to detect and connect HDMI devices. This function can be deactivated by pressing the
following buttons on the remote control:
On the Samsung Smart Remote: Select
–
(up directional button)
On the standard remote control: Select
–
(up directional button)
" If the function is deactivated and TV is turned off, the function is automatically activated again when the TV is next
switched on.

Connection notes for audio devices

For better audio quality, it is a good idea to use an AV receiver.
●
If you connect an external audio device using an optical cable, the
●
changed to the connected device. However, to make this happen, you must turn on the external audio device
before connecting the optical cable. To manually change the
Use the Quick Settings
–
Use the Select button to select
directional button
Use the Settings
–
Select Audio Out/Optical
An unusual noise coming from a connected audio device while you are using it may indicate a problem with
●
the audio device itself. If this occurs, ask for assistance from the audio device's manufacturer.
Digital audio is only available with 5.1 channel broadcasts.
●
VOL
(down directional button)
(down directional button)
screen to change to the connected device:
Audio Out/Optical
Sound Output).
screen to change to the connected device:
on the Sound Output
button. (up directional button)
Select VOL
button. (up directional button)
Select button.
Sound Output
Sound Output
on the Sound Output
menu. ( Settings
- 36 -
(left directional button)
button. .
(left directional button)
Select RETURN button.
setting is automatically
setting, do one of the following:
menu. ( Settings
Sound Sound
up
Output).