Removing Drivelock Protection - HP EliteBook 2740p User Manual

3.
4.
5.
6.
7.
Your changes go into effect when the computer restarts.

Removing DriveLock protection

To remove DriveLock protection in Computer Setup, follow these steps:
1.
2.
3.
4.
5.
6.
7.
Your changes go into effect when the computer restarts.
Using Computer Setup Auto DriveLock
In a multiple-user environment, you can set an Automatic DriveLock password. When the Automatic
DriveLock password is enabled, a random user password and a DriveLock master password will be
created for you. When any user passes the password credential, the same random user and DriveLock
master password will be used to unlock the drive.
NOTE:
DriveLock features.
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Use a pointing device or the arrow keys to select Security > DriveLock passwords, and then
press enter.
Use a pointing device to select an internal hard drive.
– or –
Use the arrow keys to select an internal hard drive, and then press enter.
Use a pointing device or the arrow keys to select the password you want to change.
Type your current password in the Old password field, type a new password in the New
password and Verify new password fields, and then press enter.
To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Turn on the computer, and then press
is displayed at the bottom of the screen.
Press f10 to enter BIOS Setup.
Use a pointing device or the arrow keys to select Security > DriveLock password, and then press
enter.
Use a pointing device or the arrow keys to select an internal hard drive, and then press enter.
Use a pointing device or the arrow keys to select Disable protection.
Type your master password, and then press enter.
To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
You must have a BIOS administrator password before you can access the Automatic
esc while the "Press the ESC key for Startup Menu" message
Using passwords 107