Winegard WF-200M Installation & Operation Manual

Long range, high performance wifi extender + 4g lte

Advertisement

Quick Links

WINEGARD
Installation / Operation Manual
STOP!
Before beginning assembly and installation, decide where you want to mount the antenna and the
power supply. The power supply will also have to be connected to 12V power source and mounted in a water
free environment.
Register your product at winegard.com/myantenna
For help, email help@winegard.com
or call 1-800-320-9992
www.winegard.com/connect
Manuel disponible en français au www.winegard.com/connect
LONG RANGE, HIGH PERFORMANCE WIFI EXTENDER + 4G LTE
4G1xM
WF-200M
ConnecT
®
Place label here
DESIGNED & TESTED
SPECIFICALLY FOR MARINE
2452397
Rev1 11/17

Advertisement

Table of Contents
loading

Summary of Contents for Winegard WF-200M

  • Page 1 The power supply will also have to be connected to 12V power source and mounted in a water free environment. Register your product at winegard.com/myantenna For help, email help@winegard.com or call 1-800-320-9992 Place label here www.winegard.com/connect Manuel disponible en français au www.winegard.com/connect 2452397 Rev1 11/17...
  • Page 2: Parts List

    Antennas (3) care and consideration is required if wiring directly to a battery. Winegard recommends wiring directly to a fused panel or fused box. Consult your vehicle manufacturer for additional information on safely 25’ Ethernet Cable installing accessories.
  • Page 3: Interior Installation

    LAN port on the PoE to the Ethernet connection WARNING: MAKE SURE NO BARE WIRE OR on your device. Winegard recommends not using an Ethernet cable WIRE STRANDS ARE VISIBLE AFTER MAKING longer than 50 feet. CONNECTIONS. FAILURE TO PROPERLY INSTALL Lastly, there are 8 mounting eyelets on the PoE.
  • Page 4: Operation

    Login Screen. Login using: Username: admin Password: admin The Winegard ConnecT 4G1xM can access the internet two different ways: Figure 7 from a local WiFi network or a 4G LTE network. To connect to a 4G LTE network, select 4G LTE Only from the internet access menu.
  • Page 5: Operation (Cont)

    Guest Network Figure 10 The Winegard ConnecT provides a simple way to set up an extra network that doesn’t have access to the Status Screen. This allows you to provide guests with an easier password to use when accessing your network while still maintaining a secure system.
  • Page 6: Connect ™ Software

    Fast Green Blink The Winegard PoE reset button was pressed for less than 10 seconds. Alternating Green & Orange Blink Power may have been removed during an update and the Winegard ODU is in rescue mode. Please contact Winegard at 1-800-320-9992.
  • Page 7 If this is not the Winegard ConnecT SSID, this address isn’t valid. If you are indeed connected to the correct network, the address may have been changed. To resolve this, press the reset button on the side of your PoE for 30 seconds.
  • Page 8: Troubleshooting (Cont)

    Winegard is a registered trademark of Winegard Company. Disclaimer: Although every effort has been made to ensure that the information in this manual is correct and complete, no company shall be held liable for any errors or omissions in this manual. Information provided in this manual was accurate at time of printing. If the antenna does not function as expected, please contact Winegard Co.

This manual is also suitable for:

Connect 4g1xm

Table of Contents