Specifications; Instructions For Putting Into Use - Chicago Electric 65766 Owner's Manual

SPECIFICATIONS

Electrical Requirements
Blade Speed
Blade Stroke
Maximum Cutting Capacity
Chuck Capacity
4010157
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before
set up or use of this product.
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool to its "OFF" position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
Item 65766
120 VAC / 60 Hz /
150W (loaded)
2600 SPM
3/8"
18 Gauge Steel
Sheet
1/2"
TO PREVENT
SERIOUS INJURY
For technical questions, please call 1-888-866-5797.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram
near the end of this manual.
Assembly
1. Use the Hex Wrench (40) to
loosen the Hex Screw (27).
See picture below.
2. Wearing work gloves, insert the
shank of the Blade (39) into the
front of the Body Saw with the
blade pointed downward.
3. Tighten the Hex Screw to
secure the Blade in place.
Hex Screw (27)
Page 10