Lg860C Assembly Instructions; Assembling The Side Shelves; Mounting The Side Shelves; Inserting The Grease Tray - Louisiana Grills LG860C Instructions And User Manual

1. ASSEMBLING THE SIDE SHELVES

Parts Required:
2 x Side Shelf (#9)
6 x Tool Hook (#B1)
6 x Screw (#B3)
Installation:
• Align tool hook with a set of holes on the outside edge of the side shelf.
From underneath, secure the tool hook with a screw, using the bottom
hole as an anchor for proper took hook alignment. Secure the other two
tool hooks on same the edge. Repeat same installation for other side shelf.

2. MOUNTING THE SIDE SHELVES

Parts Required:
10 x Screw (#B2)
Installation:
• Each side shelf requires five screws to mount to the unit. From
underneath, secure the side shelf to the side panel of the main grill.
NOTE: Do not tighten any screws completely until all screws have
been installed. Once all screws are installed, then tighten securely.
• Repeat same installation for other side shelf.
IMPORTANT: Avoid using the side shelves to move or lift the grill.
The weight of the unit will cause the side shelf to break, which is not
covered by warranty.

3. INSERTING THE GREASE TRAY

Parts Required:
Grease Tray (#7)
1 x
Installation:
• Slide the grease tray into the tray opening on the front panel of the
unit. The grease tray is completely inserted once the front of the tray
is flush with the front panel of the unit.
4. POSITIONING THE BURN GRATE
Parts Required:
1 x Burn Grate (#5)
Installation:
• A proper placement of the burn grate is vital to the use of the unit.
Insert the burn grate into the burn pot. The hole in the burn grate
should align and be open for the igniter to light the pellets. To verify
proper positioning, ensure the lip of the burn grate is flush with the
top of the burn pot.
11

LG860C ASSEMBLY INSTRUCTIONS

1
2
3
4
CURVED
LIP SITS
FLUSH
IGNITER