Sd Card Application Move - Ricoh D124-17 Service Manual

5. System Maintenance Reference

SD Card Application Move

Removing the SD Card Slot Cover
• The SD card slot cover is fastened by one screw.
• Remove this cover to insert SD cards.
• Always reattach this cover after removing or inserting SD Cards.
Restrictions and Precautions on the Use of SD Cards
• Always touch a grounded surface to discharge static electricity from your hands before you handle
SD cards.
• When an application is moved from one SD card to another SD card, the authentication data is
moved with the application program to the target SD card.
• Do not use an SD card if it has been used with a computer or other device. (The SD card may not
operate correctly.)
• The original SD card received with purchase of the application program is the only evidence that
the customer is licensed to use the application. For this reason, the original SD card should be
stored at the work site as proof of purchase by the customer. Also, the service technician may
occasionally need to check the dates and version numbers SD cards during troubleshooting.
• After an SD card has been used to combine applications on one card, it cannot be used for any
other purpose.
• Always make sure that the write-protect switch is OFF before uploading data to an SD card. It is
very easy to accidentally turn on the write-protect switch when inserting and removing an SD card.
• To remove an SD card from its slot, push it in gently to release it then pull it out of its slot.
576