Power Button Board - HP 15-cb000 Maintenance And Service Manual

Power button board

Description
Power button board for use in black and green models with AMD Radeon graphics
Power button board for use in black and white models with AMD Radeon graphics
Power button board for use in black and green models with Nvidia GeForce graphics
Power button board for use in black and white models with Nvidia GeForce graphics
Power button board cable
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the USB board (see
To remove the power button board:
1. Using a Phillips P0 screwdriver, remove the Phillips broad head PM2.0×2.0 screw (1) that secures the
power button board to the computer
2. Remove the power button board from the computer (2).
Reverse this procedure to install the power button board and cable.
Bottom cover on page
Battery on page 37).
USB board on page 50).
35).
Component replacement procedures
Spare part number
926885-001
926886-001
926887-001
926888-001
926872-001
51