Touchpad Board - HP 15-cb000 Maintenance And Service Manual

TouchPad board

Description
TouchPad board
TouchPad bracket
TouchPad board cable
Before removing the TouchPad board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
To remove the TouchPad board:
1. Disconnect the cable from the TouchPad board (1).
2. Using a Phillips P1 screwdriver, remove the three Phillips PM2.0×2.5 screws (2) that secure the bracket
to the computer, and the lift the bracket from atop the TouchPad (3).
3. Lift keyboard cable up to access screws underneath (4).
48 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 37).
35).
Spare part number
926882-001
926879-001
926873-001