Inserting A Test Strip - Accu-Chek ADVANTAGE User Manual

Inserting a Test Strip

Insert a test strip into the Accu-Chek
Introduction
Advantage ®
this is your first time to test, you may
want to read all of the instructions
thoroughly before removing the test
strip. Once you have removed the strip
from the vial, you have 3 minutes to
complete testing.
Follow these steps to insert a test strip
Inserting a
test strip
into the meter.
Step
1 Remove a new test strip from
the vial. Be sure to replace
the cap tightly.
40
®
Meter prior to testing. If
Action
Step Action
2 Make sure the yellow window on
the test strip is facing up. Insert
the end of the test strip into the
test strip slot.
41