Setting The Time And Date - Accu-Chek ADVANTAGE User Manual

Setting the Time and Date

The time and date should be set
Introduction
prior to testing if you plan to down-
load the results into software or if
you or your healthcare professional
plan to review your memory to
check when a test was done.
Y
ou may exit at any time when setting up the time and
date. The settings you have already made will be saved.
Setting the time
Follow these steps to set the time and
and date
date on your meter.
Step
1 Press the On/Off
turn on the meter.
18
Action
button to
Step Action
2 Press the On/Off
buttons at the same time until
Set appears, then release both
buttons.
You will see a screen like the
one below. Either the word On or
the word OFF will be flashing.
19
and MEM