Qualified Personnel; The Meaning Of The Pictograms - Siemens SIPART PS2 Operating Instructions Manual

Introduction and general safety notes

1.5 Qualified Personnel

1.5 Qualified Personnel
Qualified personnel are people who are familiar with the installation, mounting,
commissioning, and operation of the product. These people have the following qualifications:
● They are authorized, trained or instructed in operating and maintaining devices and
● For explosion-proof devices: They are authorized, trained, or instructed in carrying out
● They are trained or instructed in maintenance and use of appropriate safety equipment
● They should be trained in first aid.
1.6

The meaning of the pictograms

The pictograms on the warning labels are described below:
6
systems according to the safety regulations for electrical circuits, high pressures and
aggressive as well as hazardous media.
work on electrical circuits for hazardous systems.
according to the safety regulations.
Notice Pay attention to the operating instructions
Warning hot surfaces. For ambient temperatures above 55°C there is a danger
of burns on contact.
Isolate the device from power using a circuit breaker.
Protect the device from shocks (otherwise the degree of protection IP66 is not
guaranteed).
Protective insulation; device in protection class II
SIPART PS2 with mechanical limit switch module
Operating Instructions (Compact), 04/2007, A5E01179056-01