Siemens SIPART PS2 Operating Instructions Manual page 11

Overview of the installation of the option modules
The following drawing will assist you in installing the mechanical limit switch module:
① Module cover
② Fixing screws
③ Fixing screws
④ Actuating disc bearing
⑤ Pneumatic block
⑥ Transmission ratio selector
⑦ Adjustment wheel for friction clutch
⑧ Actuating disc for A2, terminals 51 and 52
⑪ I module
y
⑫ Alarm unit
SIPART PS2 with mechanical limit switch module
Operating Instructions (Compact), 04/2007, A5E01179056-01
3.3 Installing the mechanical limit switch module
⑬ SIA module or mechanical limit switch module
⑭ Insulating cover
⑮ Motherboard
⑯ Ribbon cable for alarm unit
⑰ Ribbon cable for I
y
⑱ Type plate
Set of signs
⑲ Warning label on the side across from the type plate
⑳ Wiring diagram
module
Installing
11