Table of Contents
Advertisement
Table 1. LEDs (continued)
LED
Description
2.4 GHz Link and
Indicates a 2.4 GHz or 5 GHz extender connection to a router or access point.
5 GHz Link LEDs
•
•
•
•
Client Link LED
•
•
LAN LEDs (1–4)
•
•
WPS LED
•
•
•
Rear Panel Ports, Buttons, and Connector
The following figure shows the ports, buttons, and connector on the rear panel of the
extender. The figure show the extender in an upright position, with the feet attached. (For
information about attaching the feet, see
Figure 2. Rear panel
N600 WiF Range Extender
Solid green. Best connection.
Solid amber. Good connection.
Solid red. Poor connection.
Off. No connection.
Solid green. The extender is connected to a WiFi-enabled device.
Off. The extender is not connected to a WiFi-enabled device.
Solid green. The LAN port detects a local area network (LAN) connection.
Off. No device is detected on the LAN port.
Solid green. WiFi security is enabled (WPA or WPA2).
Blinking green. A WPS connection is being established.
Off. WiFi security is not enabled.
Attach the Feet
Restore Factory Settings button
Ethernet LAN ports
Power connector
On/Off button
Overview
7
on page 8.)
Advertisement
Table of Contents
