Option Device Version M12 Connector; M12 Connector In The Basic Device; M12 Connector For Connection Of The Outputs Of The Alarm Module 6Dr4004-6A / -8A (- Z D55) - Siemens SIPART PS2 Operating Instructions Manual

Connection
5.2 Electrical wiring
5.2.5

Option device version M12 connector

This section describes which terminal of the devices and option modules listed below is
connected with the respective pole of the M12 connector.
Note
Technical specifications
Observe the specifications for the electrical data in the certificate and/or in section "Technical
data (Page 243)".
View of the mating side pole pattern
5.2.5.1

M12 connector in the basic device

You have a positioner 6DR50..-0.R.. or 6DR50..-0.S.. In this version of the positioner the
current input I
Table 5- 1
Current input terminal
6 (+)
Shield support of housing
7 and 8 (-)
5.2.5.2 M12 connector for connection of the outputs of the alarm module 6DR4004-6A / -8A (-
Z D55)
You have a positioner with order suffix -Z order code D55. This version of the positioner is
connected via an M12 connector to the current output of the position feedback module.
Table 5- 2
Alarm output terminal
41 (+)
52 (-)
42 (-)
51 (+)
94
4 to 20 mA of the basic electronics is connected via an M12 connector.
W
Assignment diagram
Assignment diagram
Pole designation Wire color of M12
connector
1 Brown
4 Black
3 Blue
2 White
Pole designation
1 - Brown
4 - Black
3 - Blue
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB