4.7.6
Internal NCS module 6DR4004-5L/-5LE
Function
Wear-free, contact-free position detection
Device features
(B) Internal NCS module 6DR4004-5L.
(C) Insulating cover, yellow
(D) Ribbon cable of the internal NCS
Figure 4-15
Requirement
● The slot required for the internal NCS module in the rack is free. The following option
● The positioner is mounted, or is to be mounted, directly on the valve using the positioner
SIPART PS2 with and without HART
Operating Instructions, 02/2016, A5E00074631-AB
module
Installing the internal NCS module
modules use the same slot in the rack:
– Alarm module
– SIA module
– Mechanical limit switch module
– Internal NCS module
shaft.
(F) Adjustment wheel for the magnet clamp
(G) Adjustment wheel for the friction clutch (without
function)
Installing/mounting
4.7 Installing option modules
69